Table of Contents
Advertisement
This projector has a picture screen resize function, which enables you to display the desirable image size.
1
Press MENU button and ON-SCREEN MENU will appear.
Press POINT LEFT/RIGHT button(s) to move a red frame
pointer to
SCREEN Menu icon.
2
Press POINT DOWN button and move a red frame pointer to
the function that you want to select and then press SELECT
button.
Provides image to fit the vertical size of the screen.
Provides image to fit the horizontal size of the screen.
Provides image in
its original size. When
larger than screen size (1366 x 768), this projector enters Digital
mode automatically. Image size can be set to Normal by
NORMAL button.
Adjusts image size or pans image. In "Digital Zoom" mode, the
ON-
SCREEN MENU disappears and the magnifying glass icon and the
message "D. Zoom" is displayed.
This projector also enters Digital Zoom mode by pressing the
D.ZOOM
button on Remote Control Unit.
A/V
Refer to the following for operation.
Expand function
To expand the image size, press the D.ZOOM A button or the
SELECT button. The image is magnified by degrees.
Compress function
To compress the image size, press the D.ZOOM V button. The
Panning function
the original image size is
Zoom
pressing
To
pan
the
image,
UP/DOWN/LEFT/RIGHT
function can work only when the image is larger
than the screen size.
To return to screen size previously set, press
NORMAL button.
To cancel Digital Zoom mode, press any button
except D.ZOOM A/V, SELECT, POINT, NORMAL
or AUTO PC ADJ. button.
NOTE
S This SCREEN Menu cannot be operated when
"HDTV72Op," "HDTV1O35i" or "HDTV1O8Oi" is
selected on SYSTEM Menu (P23, 24).
Zoom cannot be selected when
• True and Digital
"RGB" is selected on SYSTEM Menu (P23, 24),
• This projector cannot display any resolution higher
than 1280 X 1024. If your computer's screen
resolution is higher than 1280 X 1024, reset the
resolution to the lower before connecting projector.
• The image data in other than XGA (1024 x 768)
is modified to fit the screen size
• Panning function may not operate properly if the
computer system prepared on PC ADJUST Menu is
used.
press
the
POINT
buttons.
Panning
in
the initial mode.
Advertisement
Table of Contents
