Understanding the basic operations before
using the NAC-2.3
Connecting the power cord
Plug the power cord into wall socket.
Turning on the power
When the power cord is connected, the display
shown below appears.
Press the Standby/On button on the NAC-2.3 or
remote controller to turn on the power.
NAC-2.3
Standby/On
Selecting your desired source
You can press the Audio Input button to switch
among the available input sources as follows:
Audio
Input
26
Remote controller
You can also switch among the input sources
using the selector on the remote controller.
Music Server ................. Net-Tune server
iNet Radio ..................... Internet radio
Tuner ............................ FM/AM tuner.
Aux ............................... External input
(FM)
(AM)
(externally
connected
audio device)
(Server)
(iNet Radio)
The button toggles
between FM and AM.