Integra NAC-2.3 Instruction Manual page 56

Configuring Various Settings
• Turning on or off the WOL (Wakeup On
LAN) feature
WOL (Wakeup On LAN) allows you to turn
on or off the NAC-2.3 from some other
device on the network.
This setting is reserved for future extension
and not currently available. Leave the setting
at its default, "Disable".
From the "System" → "Ethernet Settings" →
"Client" setup menu, select "Wakeup on
LAN" using the Cursor / button. Then
press the Select button.
Select either "Enable" or "Disable".
Press the Select button to confirm the new
setting.
• Checking the MAC address
Open the "System" → "Ethernet Settings" →
"Client" setup menu, and press the Cursor /
button repeatedly to display the MAC address
of the NAC-2.3 (the address specific to the
network-interface of NAC-2.3).
(The MAC address shown in the display
differs for respective NAC-2.3s.)
The MAC address cannot be modified.
56
• Specifying the Net-Tune port
From the "System" → "Ethernet Settings" →
"Client" setup menu, select "Net-Tune Port"
using the Cursor / button. Then press the
Select button.
Enter the Net-Tune Port using the Cursor
/ / , and then press the Select button to
save the entered number.
Press the Setup button again to confirm the
new setting.
/