Related Manuals for Integra DTR-50.6
Summary of Contents for Integra DTR-50.6
- Page 1 DTR-50.6 Basic Manual Advanced Manual found here http://integraworldwide.com/manual/dtr506/adv/en.html...
-
Page 2: Before Start
Before Start About the Basic Manual Features Supplied Accessories The Basic Manual leads you through the fundamental steps • Equipped with 7 channel amplifier to enjoy the AV Receiver from connections to TV, speaker • THX Select2 Plus certified Indoor FM antenna --- (1) system and playback components, to necessary functions • Incorporates Qdeo™... -
Page 3: Connecting The Tv And Players
Step 1: Connections HDMI Personal computer HDMI To use the ARC function, connect to the HDMI cable ARC compatible HDMI jack of the TV and make an appropriate setting on the unit. See "2nd Step : Source Connection" of "Step 2: Setting Up". HDMI HDMI HDMI... -
Page 4: Connecting Components Without Hdmi
Step 1: Connections It is also possible to use the multi-zone function with this Analog audio (RCA) cable jack. For details, see the section 5 "Using the multi-zone function" of "Step 3: Playing Back". The unit supports the HDMI Through function that allows Connection with turntable: If it uses an MM type transmission from players to the TV even if the unit is in cartridge and does not have a built-in audio equalizer,... -
Page 5: Connecting Speakers
Step 1: Connections Connecting speakers Front R Front L Height R Wide R Wide L Height L Important: The power cord must be connected only after all Center other connections are completed. 1 2 Front speakers Center speaker 4 5 Surround speakers Subwoofer 7 8 Surround back speakers 9 F Height speakers... -
Page 6: Other Connections
Step 1: Connections When using commercially available banana plugs: Network Connection 1/2"-5/8"(12-15 mm) tighten the speaker terminals to the end and then insert the banana plugs. Do not insert the cable core directly into the You can enjoy Internet radio and DLNA by connecting the hole for banana plug of speaker terminal. -
Page 7: Turning The Power On
Step 2: Setting Up Important: When the unit is turned on for the first time, the 1st Step : AccuEQ Room Calibration Making the Initial Setup with the Setup setup wizard of the section 2 will automatically be launched. If you use the setup wizard to make the initial setup, The test tone coming from each speaker will be measured to Wizard... - Page 8 You can check whether or not each input source is ENTER Next Do you wish to turn on the CEC link? Integra DHS-8.8 connected correctly. When the screen above is displayed, set the items with When the Source Connection start screen is the cursors on the remote controller.
- Page 9 Mode button and in the keyboard screen, enter the first select “No. Skip”. three characters of the brand name of the device you are going to program (e.g., "INT" for Integra) and search for the remote control code. The guidance will also explain how to No. Skip...
-
Page 10: Playing Back
Step 3: Playing Back Remote Controller Parts Name Playing the player and TV z Receiver button: Turns the unit on or into standby mode. Remote Mode/Input Selector button: Switches the input to be played. Cursor buttons and Enter button: Moves the cursor and confirms the selection. -
Page 11: Listening Modes
Step 3: Playing Back Listening Modes Muting Temporarily: Press Muting on the remote Listening to AM/FM Radio controller. Press Muting again to cancel muting. Select the desired mode by switching and listening actual Changing the Display Brightness: Press Dimmer on sound in different modes. -
Page 12: Using The Home Menu
Step 3: Playing Back Network Service: Select to use Internet radio services Using the Home menu Using Quick Setup menu and the DLNA function. When you connect the unit to the network and press Enter, the network service screen will be displayed on the TV. - Page 13 Step 3: Playing Back AccuEQ Room Calibration: Disables the sound field Video: set in the automatic speaker setting. The setting can be Monitor Out: The video input signals input to the unit separately set to each input. will be converted by the unit when they are output from • This setting cannot be selected if the automatic the HDMI OUT jack to the TV so that their resolution can speaker setting has not been performed.
- Page 14 Step 3: Playing Back Change the setting: Press Receiver and then Home on ¼1 Supported by HDMI IN1 to IN4 and AUX Input HDMI/MHL jacks. Using the multi-zone function ¼2 When you connect a CD player or such other player without HDMI the remote controller, select "Setup"...
-
Page 15: Performing Multi-Zone Playback
Step 3: Playing Back c. Connecting Speakers in a Separate Room Performing Multi-zone Playback • While Zone 2 or Zone 3 is on, the RI linked system function (interlink between Onkyo components) is It is possible to directly connect the speakers in another Press Zone on the remote controller several times to disabled. -
Page 16: Front Panel
(Other models) Front Panel zOn/Standby button: Turns the unit on or into standby mode. RT/PTY/TP button (Other models): Can be used when Whole House Mode button: Controls the WHOLE Hybrid Standby indicator: Stays lit if the unit enters receiving the station transmitting text information. HOUSE MODE function to play the same source in all standby when the HDMI Through and network standby Memory button: Registers or deletes a station. -
Page 17: Rear Panel
Display Stays lit in the following conditions. "Z2" "Z3": Zone 2 or Zone 3 output is on. / "HDMI": HDMI signals are input and HDMI input selector is selected. / "ARC": Audio signals are input from ARC compatible TV and TV/CD input selector is selected. -
Page 18: Troubleshooting
Troubleshooting HDMI control does not function correctly. Resetting the Unit Before starting the procedure • Set the CEC link function of the unit to on. It is also Problems may be solved by simply turning the power Resetting the unit to the status at the time of shipment may necessary to make the HDMI linked system setting on on/off or disconnecting/connecting the power cord, solve the problem. -
Page 19: Specifications
Specifications Amplifier Section General Speaker Outputs FRONT L/ R, CENTER, SURROUND L/R, BACK L/R, HEIGHT/Bi-AMP L/R, WIDE/ZONE 2 L/R Rated Output Power Power Supply Phones All channels: 130 watts minimum continuous power per channel, AC 120 V, 60 Hz (North American) PHONES (Front, ø... -
Page 20: License And Trademark Information
U.S. Pat. nos. 7,254,239 & 7,593,533 & 7,974,425 & 8,452,028 & 8,509,457 registered trademarks of MHL LLC in the United States and other counties.” Taiwan Pat. I238671 European Pat. 1,360,874 Integra Division of Integra Division of Integra Division of 1301, 555 Tower, No.555 West NanJin Road, Jin an, Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, 18 park Way, Upper Saddle River, N.J.