Adjusting The Projector Image ("Scr - Adj" Menu); Setting The Resize Mode; Adjusting The Image Position; Keystone Correction - Eiki EIP-250 Owner's Manual

Adjusting the Projected Image
("SCR - ADJ" Menu)

1 Setting the Resize Mode

1 1
1 1
Note
• For details of the Resize mode, see pages
30 and 31.
• You can also press RESIZE on the remote con-
trol to set the resize mode. (See page 30.)
2 Adjusting the Image
2 2
2 2
Position
You can move the projected image vertically.
O button
Note
• This function only works in some RESIZE
modes. (See pages
Picture SCR - ADJ
1 Resize
2
Image Shift
3
Keystone
4
OSD Display
5
Closed Caption
6
Background
7
Setup Guide
8
PRJ Mode
9
Language
SEL./ADJ.
Q button
30 and 31.)
PRJ - ADJ Help
Normal
0
0
On
CC1
Logo
On
Front
English
ENTER END

3 Keystone Correction

3 3
3 3
When the image is projected either from the top
or from the bottom towards the screen at an angle,
the image becomes distorted trapezoidally. The
function for correcting trapezoidal distortion is
called Keystone Correction.
Select "Keystone" on the "SCR-ADJ"
menu and adjust with the slide bar.
See page 28 for details of Keystone Correction.
Q button
Note
• The Keystone Correction can be adjusted up
to an angle of approximately ±40 (EIP-2600)/
±20 (EIP-250) degrees (when "Resize" is set
to "Normal").
• You can also press KEYSTONE on the remote
control or on the projector to adjust Keystone
Correction.
4 Setting the On-screen
4 4
4 4
Display
Selectable
items
On All on-screen displays are displayed.
Off INPUT/VOLUME/AV MUTE/FREEZE/
AUTO SYNC/RESIZE/PICTURE MODE/
ECO+QUIET/MAGNIFY/ "An invalid
button has been pressed." are not
displayed.
Menu operation n Page
O button
Description
38
43