Specifications - Eiki EIP-250 Owner's Manual

Specifications

Model
Display devices
Resolution
Lens F number
Zoom
Focus
Input terminals DVI-I (Compatible with HDCP)
RGB/Component (mini D-sub 15 pin)
S-Video (mini DIN 4 pin)
Video (RCA)
Audio (ø3.5 mm stereo minijack)
Audio (RCA)
Output terminals RGB/Component (mini D-sub 15 pin)
Audio (ø3.5 mm stereo minijack)
Control, others USB (Type B)
RS-232C (mini DIN 9 pin)
Speakers
Projection lamp
Rated voltage
Rated frequency
Input current
Power consumption (Standby)
Operation temperature
Cabinet
Dimensions (main body only) [W × H × D]
Weight (approx.)
As a part of policy of continuous improvement, EIKI reserves the right to make design and
specification changes for product improvement without prior notice. The performance specifica-
tion figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
This EIKI projector uses a DLP
(EIP-2600)/480,000 (EIP-250) pixels (micromirrors). As with any high technology electronic
equipment such as large screen TVs, video systems and video cameras, there are certain
acceptable tolerances that the equipment must conform to.
This unit has some inactive pixels within acceptable tolerances which may result in inactive dots
on the picture screen. This will not affect the picture quality or the life expectancy of the unit.
EIP-2600
0.55" DLP
XGA (1024×768)
F 2.5 – 2.6
Manual, ×1.15 (f = 20.4 – 23.5 mm)
Manual
×1
×1
×1
×1
×1
×1 (L/R)
×1
×1 (variable audio output)
×1
×1
2 W (Mono)
230 W
AC 100 – 240 V
50/60 Hz
3.2 A
303 W (5.0 W) with AC 100 V 267 W (5.0 W) with AC 100 V
293 W (5.7 W) with AC 240 V 259 W (5.7 W) with AC 240 V
41°F to 95°F (+5°C to +35°C)
Plastic
" × 3
41
10 /
64
(270 × 89 × 265 mm)
6.4 lbs. (2.9 kg)
® chip. This very sophisticated panel contains 786,432
EIP-250
®
Chip
SVGA (800×600)
–
–
–
200W
2.9 A
" × 10
33 7
/ / "
64 16
65