Computer Input Source Selection - Eiki Multimedia Projector LC-XT5 Owner's Manual

Computer Input Source Selection

Menu Operation
When Selecting the INPUT 1 with DVI/D-sub 15 Board
1 Press the MENU button to display the On-Screen Menu.
Use the Point 7 8 buttons to move the red frame pointer
to the INPUT Menu icon.
2
Use the Point ed buttons to move the red arrow pointer
to the desired input and then press the SELECT button.
The Source Select Menu appears.
3
Use the Point ed buttons to select the desired source
and then press the SELECT button.
RGB (PC analog)
When your computer is connected to the INPUT 1 (ANALOG)
terminal, select RGB (PC analog).
RGB (PC digital)
When your computer is connected to INPUT 1 (DIGITAL)
terminal, select RGB (PC digital).
When Selecting the INPUT  with 5-BNC/Video Board
When connecting the computer output [5 BNC Type
(Green, Blue, Red, Horiz. Sync, and Vert. Sync.)] from the
computer to G, B, R, H/HV, and V jacks:
RGB
When your computer is connected to the INPUT 2 (5 BNC
INPUT JACKS) terminal, select RGB.
INPUT MENU
Input 1
✔ Note:
• HDCP (High-bandwidth Digital Content Protection) is a
system for protecting digital entertainment content which is
delivered by DVI (Digital Visual Interface) from being copied.
The specification of HDCP is decided and controlled by Digital
Content Protection, LLC. Should the specification be changed,
this projector may not display the digital content protected by
HDCP .
INPUT MENU
Input 
Input Selection
Input Menu icon
Move the pointer (red arrow) to Input
1 and press the SELECT button.
Source Select Menu
Move the pointer (red
arrow) to the desired source
and press the SELECT
button.
INPUT Menu icon
Move the pointer (red arrow) to Input
2 and press the SELECT button.
Source Select Menu
Move the pointer (red
arrow) to RGB and press the
SELECT button.
1