Dsp Depth - Yamaha Clavinova CLP-480 Owner's Manual

Turning the Vibraphone vibrato effect
VibeRotorOnOff
This will be displayed only if VibeRotor is selected for the
DSP Type parameter explained above. It turns on/off the
vibrato effect that is applied when you use the VibeRotor
pedal.
VibeRotorOnOff
Main(GrndPno )
Select a Voice part.
Setting range:
On/Off
Default setting:
Differs depending on the Voice.
Setting the rotation speed of the
rotary speaker*
RotarySpeed
This will be displayed only if Rotary is selected for the
DSP Type parameter explained above. It sets the rotation
speed of the rotary speaker effect.
RotarySpeed
Main(GrndPno )
Select a Voice part.
Setting range:
Slow/Fast
Default setting:
Differs depending on the Voice.
Adjusting the depth of the DSP effect*
This sets the depth of the DSP effect (page 63). Some DSP
Type settings do not allow you to set the DSP Depth.

DSP Depth

Main(GrndPno )
Select a Voice part.
Detailed Settings
64
Detailed settings for Voices — [VOICE SETTING]
on/off*
Store the setting.
Set? _ >
Off
Set the value.
Store the setting.
Set? _ >
Slow
Set the value.
DSP Depth
Store the setting.
Set? _ >
26
Set the value.
Setting range:
1 (output only the original sound with almost no effect applied) –
127 (output only the sound processed by the effect)
Default setting:
Differs depending on the Voice.
Adjusting the brightness of the
sound*
Brightness
NOTE
Brightness may have little audible effect or not be applied to some
Voices.
Brightness
Main(GrndPno )
Select a Voice part.
Setting range:
-64 – +63 (The higher the value, the brighter the sound.)
Default setting:
Differs depending on the Voice.
Adjusting the resonance effect*
HarmonicContent
Resonance can produce a distinctive "peaky" tone,
making the sound brighter and harder.
NOTE
Harmonic content may have little audible effect or not be applied
to some Voices.
HarmonicContent
Main(GrndPno )
Select a Voice part.
Setting range:
-64 – +63
Default setting:
Differs depending on the Voice.
Setting the touch sensitivity*
TouchSense
This parameter enables determines the manner and
degree to which the volume level changes in response to
your touch on the keyboard (how hard you play). Since
Store the setting.
Set? _ >
0
Set the value.
Store the setting.
Set? _ >
0
Set the value.