Turning The Vibraphone Vibrato Effect On/Off [Viberotoronoff (Rotoronoff)]; Setting The Rotation Speed Of The Rotary Speaker [Rotaryspeed (Rot.speed)]; Adjusting The Depth Of The Dsp Effect [Dspdepth]; Adjusting The Brightness Of The Sound [Brightness] - Yamaha Clavinova CLP-175 Owner's Manual

Turning the vibraphone
vibrato effect on/off* [VibeRo-
torOnOff (RotorOnOff)]
This will be displayed only if VibeRotor is selected
for the DSP Type parameter explained above.
It turns on/off the vibrato effect that is applied
when you use the VibeRotor pedal.
See the procedure on page 73.
A
C
Setting range:
On/Off
Setting the rotation speed of
the rotary speaker* [Rota-
rySpeed (Rot.Speed)]
This will be displayed only if RotarySpeaker is
selected for the DSP Type parameter explained above.
It sets the rotation speed of the rotary speaker effect.
See the procedure on page 73.
Setting range:
Slow/Fast
Adjusting the depth of the
DSP effect* [DSPDepth]
This sets the depth of the DSP effect (page 82).
Some DSP Type settings do not allow you to set the
DSPDepth.
See the procedure on page 73.
Setting range:
1 (output only the original sound with almost no
effect applied)–127 (output only the sound pro-
cessed by the effect)
Detailed settings for the voices [VOICE SETTING]
Adjusting the brightness of the
sound* [Brightness]
See the procedure on page 73.
B
Setting range:
–64–+63
NO YES
Adjusting the resonance
D
effect* [HarmonicContent
(Harmonic)]
See the procedure on page 73.
Setting range:
–64–+63
Resonance can produce a distinctive "peaky" tone, mak-
ing the sound brighter and harder.
TIP
83
CLP-175