Yamaha Clavinova CLP-480 Owner's Manual page 62

Setting the position of right and left
You can specify the position in the stereo image from
which you hear the sound.
Pan
Main(GrndPno )
Select a Voice part.
Setting range:
L64 (hard left) – C (center) – R63 (hard right)
Default setting:
Differs depending on the Voice.
Make fine adjustments to the pitch
(only in Dual mode)
The pitch of the two sounds selected in the Dual mode
can be "skewed" slightly away from each other.
Detune
MainxLayer
Select a Voice part.
Setting range:
-20 – +20 (Positive (+) settings will raise the pitch of Voice 1 and
lower the pitch of Voice 2. Negative (–) settings will do the
opposite.)
Default setting:
Differs depending on the Voice.
Selecting the reverb type
ReverbType
The Reverb Type selection is applied to all the Voice parts
commonly or the instrument entirely.
ReverbType
Detailed Settings
62
Detailed settings for Voices — [VOICE SETTING]
channels*
Pan
Store the setting.
Set? _ >
C
Set the value.
Detune
Store the setting.
Set? _ >
+ 3
Set the value.
Store the setting.
Set? _ >
Hall1
Set the value.
Setting range:
• Room
Simulates reverberation in a room.
• Hall1
Simulates reverberation in a concert hall.
• Hall2
Reverberation is slightly longer than that of "Hall1."
• Stage
Reverberation suitable for a solo instrument sound.
• Plate
Reverberation simulating that created by vibration of a metal
plate.
Default setting:
Differs depending on the Voice or Voice combination.
Setting the reverb depth*
ReverbSend
NOTE
The reverb effect is not applied if the ReverbSend parameter is set
to "0."
ReverbSend
Main(GrndPno )
Select a Voice part.
Setting range:
0 – 127
Default setting:
Differs depending on the Voice.
Selecting the chorus type
ChorusType
The Chorus Type selection is applied to all the Voice parts
commonly or the instrument entirely.
ChorusType
Setting range:
• Chorus
Adds a rich, spacious sound.
• Celeste
Adds swell and a spacious sound.
• Flanger
Adds swell effects similar to the sound of an ascending or
descending jet plane.
Default setting:
Differs depending on the Voice or Voice combination.
Store the setting.
Set? _ >
10
Set the value.
Store the setting.
Set? _ >
Chorus
Set the value.