Yamaha Clavinova CLP-480 Owner's Manual page 84

4.
Attach A.
4-1
Adjust the position of A so that the left and
right ends of A will project beyond E and F
equally (as seen from the rear).
4-2
Secure A using two 6 x 16mm short screws
from the rear.
4-3
Secure A using four 6 x 16mm short screws
from the front.
4-1
A
4-2
4-4
Firmly tighten the screws from the upper
parts you temporarily fastened in step 2-4
(assembly B).
4-4
Appendix
84
Assembling the Clavinova
B
B
5.
Connect the speaker cord.
5-1
Remove the twist tie attaching the speaker
cord.
5-2
Insert the speaker cord plug into the
connector so that the tab extends toward the
front when viewed from the rear.
6.
4-3
Connect the pedal cord.
6-1
Insert the pedal cord plug into the [PEDAL]
connector.
6-2
Attach the cord holders to the instrument,
then clip the cord into the holders. At this
time, be careful that the pedal cord isn't
loose between the plug and cord holder.
6-3
Use a twist tie to bundle the pedal cord.
6-1
E
6-3
6-2