Yamaha Clavinova CLP-480 Owner's Manual page 58

Playing back the phrase specified by
the phrase number*
PhraseMark
If you select a Song from an ensemble collection disk,
such as the "XG for Piano" disks, you can specify phrase
numbers in the score to play back from the score from the
mark point, or to play back the phrase repeatedly.
If you start playing back a Song with "Repeat On"
selected, the count down starts, followed by the repeated
playback of the specified phrase until you press the
[STOP] button.
If you select "Repeat Off, " normal playback starts without
repeat.
PhraseMark
001
Specify the phrase number.
Setting range of the phrase number:
--- (not specified)
000 – the last phrase number of the Song
NOTE
If you select any Song without the phrase marks, you can select
only "Off."
Correcting note timing*
You can correct the timing of notes. For example, you can
adjust recorded notes to precise eighth or sixteenth notes.
Changes are made by Song.
Quantize
Strength=100%
Set the Quantize strength.
Detailed Settings
58
Detailed settings for recording and playback — [FILE/SONG SETTING]
Select repeat on or off.
RepeatOff
Quantize
Stores the changed value.
Execute? _ >
1/16
Specifies the type of note.
Notes for which you can adjust the timing:
1/4................
quarter note
1/6................
quarter note triplet
eighth note
1/8................
1/12.............. eighth note triplet
1/16.............. sixteenth note
1/24..............
sixteenth note triplet
1/32..............
thirty-second note
1/8+1/12.......
eighth note + eighth note triplet*
1/16+1/12.....
sixteenth note + eighth note triplet*
1/16+1/24.....
sixteenth note + sixteenth triplet*
The three Quantize settings marked with asterisks (*) are
exceptionally convenient, since they allow you to quantize two
different note values at the same time. For example, when the
straight eighth notes and eighth notes triplet are contained in the
same part, if you quantize by the straight eighth notes, all notes in
the part are quantized to straight eighth notes—completely
eliminating any triplet feel.
However, if you use the eighth note + eighth note triplet setting,
both the straight and triplet notes will be quantized correctly.
Default setting:
1/16
Setting the Quantize strength*
From this display, you can determine how strongly the
notes will be quantized. A setting of 100% produces exact
timing. If a value less than 100% is selected, notes will be
moved toward the specified quantization beats according
to the specified percentage. Applying less than 100%
quantization lets you preserve some of the "human" feel
in the recording.
Quarter-note length
Original data
Quantizing strength=100
Quantizing strength=50
Setting range:
0% – 100%
Default setting:
100%