Turning The Vibraphone Vibrato Effect On/Off [Viberotoronoff (Rotoronoff)]; Setting The Rotation Speed Of The Rotary Speaker [Rotaryspeed (Rot.speed)]; Adjusting The Depth Of The Dsp Effect [Dspdepth]; Adjusting The Brightness Of The Sound [Brightness] - Yamaha PF-500 Owner's Manual

Turning the vibraphone
vibrato effect on/off* [VibeRo-
torOnOff (RotorOnOff)]
This will be displayed only if VibeRotor is selected
for the DSP Type parameter explained above.
It turns on/off the vibrato effect that is applied
when you use the VibeRotor pedal.
See the procedure on page 63.
A
C
Setting range:
On/Off
Setting the rotation speed of
the rotary speaker* [Rota-
rySpeed (Rot.Speed)]
This will be displayed only if RotarySpeaker is
selected for the DSP Type parameter explained above.
It sets the rotation speed of the rotary speaker effect.
See the procedure on page 63.
Setting range:
Slow/Fast
Adjusting the depth of the
DSP effect* [DSPDepth]
This sets the depth of the DSP effect (page 72).
Some DSP Type settings do not allow you to set the
DSPDepth.
See the procedure on page 63.
Setting range:
1 (output only the original sound with almost no
effect applied)–127 (output only the sound pro-
cessed by the effect)
Detailed settings for the voices [VOICE SETTING]
Adjusting the brightness of the
sound* [Brightness]
See the procedure on page 63.
B
Setting range:
–64–+63
NO YES
Adjusting the resonance
D
effect* [HarmonicContent
(Harmonic)]
TERMINOLOGY
Resonance= Sympathetic vibration
See the procedure on page 63.
Setting range:
–64–+63
73
PF-500