Yamaha Clavinova CLP-480 Owner's Manual page 66

Setting range:
Same as "Setting the right pedal function" (page 65).
Default setting:
Expression
<Optional pedal>
Yamaha FC7 foot controller
This foot controller is suitable for controlling Expression,
SustainCont, or PitchBend Up/Down.
Yamaha FC4 foot switch
Yamaha FC5 foot switch
These foot switches are suitable for controlling Sustain, Sostenuto,
Soft, RotarySpeed, or VibeRotor.
Turning the right pedal function on/
RPedalOnOff
This turns the right pedal function on or off for the
relevant Voice part. In other words, you can select the
desired Voice part and determine whether the right pedal
function (set on page 65) will affect that part or not.
RPedalOnOff
Main(GrndPno )
Select a Voice part.
Setting for:
Main, M.L. (Main Layer), Left, L.L. (Left Layer)
Setting range:
On/Off
Default setting:
Differs depending on the Voice.
Turning the center pedal function on/
CPedalOnOff
This turns the center pedal function on or off for the
relevant Voice part. In other words, you can select the
desired Voice part and determine whether the center
pedal function (set on page 65) will affect that part or not.
CPedalOnOff
Main(GrndPno )
Select a Voice part.
Setting for:
Main, M.L. (Main Layer), Left, L.L. (Left Layer)
Detailed Settings
66
Detailed settings for Voices — [VOICE SETTING]
off
Store the setting.
Set? _ >
On
Set the value.
off
Store the setting.
Set? _ >
On
Set the value.
Setting range:
On/Off
Default setting:
Differs depending on the Voice.
Turning the left pedal function on/off
LPedalOnOff
This turns the left pedal function on or off for the relevant
Voice part. In other words, you can select the desired
Voice part and determine whether the left pedal function
(set on page 65) will affect that part or not.
LPedalOnOff
Main(GrndPno )
Select a Voice part.
Setting for:
Main, M.L. (Main Layer), Left, L.L. (Left Layer)
Setting range:
On/Off
Default setting:
Differs depending on the Voice.
Turning the auxiliary pedal function
on/off
AuxPedalOnOff
This turns the auxiliary pedal function on or off for the
relevant Voice part. In other words, you can select the
desired Voice part and determine whether the auxiliary
pedal function (set on page 65) will affect that part or not.
AuxPedalOnOff
Main(GrndPno )
Select a Voice part.
Setting for:
Main, M.L. (Main Layer), Left, L.L. (Left Layer)
Setting range:
On/Off
Default setting:
Differs depending on the Voice.
Store the setting.
Set? _ >
On
Set the value.
Store the setting.
Set? _ >
On
Set the value.