Yamaha Clavinova CLP-480 Owner's Manual page 28

Drives (data location)
• PRESET
You can select the Preset Songs (50 Piano Preset Songs). You can also refer to
the included "50 greats for the Piano" (Music Book) that contains the scores.
• MEMORY
You can select your own recorded MIDI Songs on this instrument as well as
MIDI Songs copied from the USB storage device to this instrument.
• USB1
This appears only when USB storage device(s) is connected to the [USB TO
DEVICE] terminal. You can select the MIDI Songs in the USB storage device.
The indications USB1, USB2, etc. will be displayed depending on the number
of the connected devices.
• USB AUDIO
This appears only when USB storage device(s) is connected to the [USB TO
DEVICE] terminal. You can select the Audio Songs in the USB storage device
(USB1).
2-2
Use the C [–]/[+] buttons to select a Song or folder.
If a Song is selected, the Song type and number are shown to the left of the
colon while the Song name is shown to the right. If a folder is selected, "FLD"
is shown to the left of the colon while the folder name is shown to the right.
Song type and number
For information about the letter prefixes in the Song number indicating the
Song types, refer to page 41.
3.
Press the [PLAY/PAUSE] button to start playback.
MIDI Song playback display
Audio Song playback display
You can play the keyboard along with Song playback. You can also change the Voice
for your keyboard performance. To adjust the volume balance between your
keyboard performance and Song playback, use the [SONG BALANCE] slider (page
40).
Advanced Functions
28
Playing back Songs
Drive
PRESET
P _ 003 :Gavotte
Song name (or folder name)
(or "FLD")
USB1
U1 _ 001 : Song001
USB AUDIO
A _ 001 : Song002
Bar 001
_ / _
Current measure number
Bar 005
_ / _
Current elapsed time
00:05
_ / _
NOTE
If a Song or folder name is too
long to be shown at one time,
press the [SONG SELECT]
button to show the entire name
(up to 46 one-byte characters)
at one time. To select a Song
easier or more smoothly, it is a
good idea to shorten the Song
name on a computer
beforehand.
NOTE
The "" and "" indicators
may be displayed in the lower
right of the screen. In this case,
you can use the D [+] button to
open the folder. Press the D [–]
button to shift to the upper
level.
NOTE
"-----: New Song" is a blank
Song file provided for you to
record your performance
(page 34).
NOTE
If a Song has been selected,
the Song tempo is used. The
setting of "Using the
metronome" (page 17) will be
ignored.
NOTE
Useful playback functions are
described on page 30.
NOTE
The metronome can be used
during playback. The
metronome will automatically
stop when playback is
stopped.