I/O Controller; Serial Port; Parallel Port; Diskette Drive Controller - Intel BOXD845GLVAL - 845GL CEL/P4 400MHZ FSB UATX Specification

Intel Desktop Board D845GLVA Technical Product Specification

1.9 I/O Controller

The I/O controller (SMSC LPC47M172 or National Semiconductor PC87372) provides the
following features:
•
One serial port
•
One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port
(EPP) support
•
Serial IRQ interface compatible with serialized IRQ support for PCI systems
•
PS/2-style mouse and keyboard interfaces
•
Interface for one 1.2 MB or 1.44 MB diskette drive
•
Intelligent power management, including a programmable wake-up event interface
•
PCI power management support
The BIOS Setup program provides configuration options for the I/O controller.
For information about
SMSC LPC47M172 I/O controller
National Semiconductor PC87372 I/O Controller

1.9.1 Serial Port

The Desktop Board has one serial port connector located on the back panel. The serial port
supports data transfers at speeds up to 115.2 kbits/sec with BIOS support.

1.9.2 Parallel Port

The 25-pin D-Sub parallel port connector is located on the back panel. Use the BIOS Setup
program to set the parallel port mode.

1.9.3 Diskette Drive Controller

The I/O controller supports one diskette drive. Use the BIOS Setup program to configure the
diskette drive interface.

1.9.4 Keyboard and Mouse Interface

PS/2 keyboard and mouse connectors are located on the back panel.

INTEGRATOR'S NOTE
The keyboard is supported in the bottom PS/2 connector and the mouse is supported in the top
PS/2 connector. Power to the computer should be turned off before a keyboard or mouse is
connected or disconnected.
30
Refer to
http://www.smsc.com
http://www.national.com