Jumper Blocks; Front Panel Audio Connector/Jumper Block; Location Of The Jumper Blocks - Intel BOXD845GLVAL - 845GL CEL/P4 400MHZ FSB UATX Specification

Intel Desktop Board D845GLVA Technical Product Specification

2.9 Jumper Blocks

CAUTION
Do not move any jumpers with the power on. Always turn off the power and unplug the power
cord from the computer before changing a jumper setting. Otherwise, the Desktop Board could be
damaged.
Figure 10 shows the location of the jumper blocks.
1
9
B
3
J9H2
Item Description
A

Front panel audio connector/jumper block

B BIOS Setup configuration jumper block
2.9.1 Front Panel Audio Connector/Jumper Block
This connector has two functions:
•
With jumpers installed, the audio line out signals are routed to the back panel audio line out
connector.
•
With jumpers removed, the connector provides audio line out and mic in signals for front panel
audio connectors.
Table 35 describes the two configurations of this connector/jumper block.
58
A
2
10
J8A1
1
Figure 10. Location of the Jumper Blocks
OM15878
Reference Designator
J8A1
J9H2