Intel Desktop Board D845GLVA Technical Product Specification
Table 31.
States for a One-Color Power LED
LED State
Off
Steady Green
Blinking Green
Table 32.
States for a Two-Color Power LED
LED State
Off
Steady Green
Blinking Green
Steady Yellow
Blinking Yellow
INTEGRATOR'S NOTE
To use the message waiting function, ACPI must be enabled in the operating system and a
message-capturing application must be invoked.
2.8.3.1.4
Power Switch Connector
Pins 6 and 8 can be connected to a front panel momentary-contact power switch. The switch must
pull the SW_ON# pin to ground for at least 50 ms to signal the power supply to switch on or off.
(The time requirement is due to internal debounce circuitry on the Desktop Board D845GLVA.) At
least two seconds must pass before the power supply will recognize another on/off signal.
2.8.3.2
Auxiliary Front Panel Power/Sleep/Message-Waiting LED Connector
Pins 1 and 3 of this connector duplicate the signals on pins 2 and 4 of the front panel connector.
Table 33 lists the signal names of the Auxiliary Front Panel Power/Sleep/Message-Waiting LED
Connector.
Table 33.
Auxiliary Front Panel Power/Sleep/Message-Waiting LED Connector
Pin
Signal Name
1
HDR_BLNK_GRN
2
Not connected
3
HDR_BLNK_YEL
56
Description
Power off/sleeping
Running
Running/message waiting
Description
Power off
Running
Running/message waiting
Sleeping
Sleeping/message waiting
In/Out
Out
Out
Description
Front panel green LED
Front panel yellow LED