Table of Contents
Advertisement
Platform Firmware Update
memory error. Please make sure to download the latest afudos.exe for EFI BIOS to
update the evaluation board. AMI„s EFI BIOS is called AMI Aptio.
4.2
Management Controller Update
The management controller firmware can be updated through the management
interface on the Mini-ITX.
4.2.1
Requirements
Appropriate Serial Cable
Windows Machine with a Terminal Client supporting XModem
The latest Management Controller Firmware
4.2.2
Installation Steps
1. Configure the Terminal Client as shown in Figure 3
2. Connect the serial Port cable to the serial port on the PC and to J2101 on the
mini-itx.
3. Make sure that the terminal client is in the connect state
4. Hit the reset switch on the carrier or recycle power
5. When the Embedded Controller boots, you will see a display as shown in
Figure 4.
6. Within 3 seconds press any key and you will see a dialog as shown in Figure 5.
7. Select Option 1 if you want to reflash firmware
8. When prompted to start Xmodem, select Transfer->Send File from the
Terminal Client Menu as shown in Figure 6.
9. Enter the file that you want to download and press send.
10. After the firmware has been downloaded, press any key and the menu will
reappear.
11. Select 3 to boot the Embedded Controller or recycle power
324421/ User Guide
25
Advertisement
Table of Contents
