Ide Configuration Submenu - Intel BOXD845GLVAL - 845GL CEL/P4 400MHZ FSB UATX Specification

4.4.4 IDE Configuration Submenu

To access this submenu, select Advanced on the menu bar and then IDE Configuration.
Maintenance
The menu represented in Table 54 is used to configure IDE device options.
Table 54.

IDE Configuration Submenu

Feature
IDE Controller
PCI IDE Bus Master
Hard Disk Pre-Delay
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Main Advanced
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
USB Configuration
Chipset Configuration
Options
• Disabled
• Primary
• Secondary
• Both (default)
• Disabled
• Enabled (default)
• Disabled (default)
• 3 Seconds
• 6 Seconds
• 9 Seconds
• 12 Seconds
• 15 Seconds
• 21 Seconds
• 30 Seconds
Select to display sub-
menu
Select to display sub-
menu
Select to display sub-
menu
Select to display sub-
menu
Security Power
Description
Specifies the integrated IDE controller.
Primary enables only the primary IDE controller.
Secondary enables only the secondary IDE controller.
Both enables both IDE controllers.
Enables/disables the use of DMA for hard drive BIOS
INT13 reads and writes.
Specifies the hard disk drive pre-delay.
Reports type of connected IDE device.
Reports type of connected IDE device.
Reports type of connected IDE device.
Reports type of connected IDE device.
BIOS Setup Program
Boot Exit
89