Mounting & Wiring Alarms - Ei Electronics Ei2110 Installer's Instructions

B16350-R0-Ei2100 SERIES-U&C.qxd 18/9/08 3:46 PM Page 19
5.1 Mounting & Wiring Alarms
1. Select a location complying with the advice in previous sections (see pages 8-18).
2. Disconnect the AC mains supply from the circuit that is going to be used.
3. Lift off the wiring cover as shown in Figure 3.
FOAM CEILING GASKET
INSERT SCREWDRIVER
TO LIFT AND REMOVE
WIRING COVER
Figure 3
19