Lexmark 21S0150 - E 321 B/W Laser Printer Reference page 61

What this light sequence means:
The printer has a service error and printing has stopped.
What you can do:
Turn the printer off and back on. If the lights are still blinking,
contact the place where you bought your printer.
Secondary error code
What this light sequence means:
The printer has one of the following errors:
•
Memory is full.
•
A page is too complex to print.
•
A page is shorter than the set page margins.
•
Resolution of a formatted page is reduced to 300 dpi
before printing.
•
A font error occurred.
•
Memory is insufficient to save what is in the buffer.
•
Printer memory is insufficient to defragment flash
memory.
•
Communication with the host computer is lost.
What you can do:
•
Press and release
secondary message.
•
Press and release
message.
twice quickly to see the
Continue
to clear the secondary
Continue
61
Ready/Data
Toner Low
Load Paper
Paper Jam
Error
Press Continue
Continue Cancel
Ready/Data
Toner Low
Load Paper
Paper Jam
Error
Press Continue
Continue Cancel