Lexmark 21S0150 - E 321 B/W Laser Printer Reference page 51

What this light sequence means:
•
The printer is ready to receive and process data.
•
The printer is in Power Saver mode.
What you can do:
•
Send a print job.
•
Press and release
settings pages for a list of current printer settings.
•
Press and hold
Note: If you want to change the Power Saver
setting, it can only be set from the Local
Printer Setup Utility (see
Local Printer Setup
What this light sequence means:
The printer is ready to receive and process data. In addition,
the toner in the print cartridge is getting low.
What you can do:
•
Send a print job.
•
Press and release
settings page for a list of current printer settings.
•
Remove the print cartridge
the life of the cartridge.
•
Replace the print
•
Press and hold
Note: The Toner Low light does not come on if
the starter print cartridge is installed in
the Lexmark E321.
to print the menu
Continue
to reset the printer.
Cancel
Using the
Utility).
to print the menu
Continue
and shake it to extend
cartridge.
to reset the printer.
Cancel
Continue Cancel
Continue Cancel
51
Ready/Data
Toner Low
Load Paper
Paper Jam
Error
Press Continue
Ready/Data
Toner Low
Load Paper
Paper Jam
Error
Press Continue