Lexmark 810 Series Install Manual

810 Series Color Jetprinter™
Unpack your printer.
1
Note: Contents may vary based on geography.
Note: You may need to purchase a USB
cable separately.
Raise the paper support.
4
Open the cartridge lids, insert the cartridges, and snap the lids closed.
8
21G0070
Your printer may include a photo cartridge
instead of a black print cartridge.
Before you continue, remove the photo
cartridge from the print cartridge storage unit.
Reminder: Save the print cartridge storage
unit to protect unused cartridges.
Extend the paper exit tray.
5
9
Safety information
• Use only the power supply provided with this product or the
manufacturer's authorized replacement power supply.
• Connect the power supply cord to an electrical outlet that is
near the product and easily accessible.
Connect the power cord.
2
Raise the access cover.
6
Close the access cover.
• Refer service or repairs, other than those described in the
user documentation, to a professional service person.
CAUTION: Do not set up this product or make any electrical or
cabling connections, such as the power supply cord, during a
lightning storm.
www.lexmark.com
Make sure the power is on.
3
Remove the sticker and tape from the bottom of the
7
print cartridges.
Load paper and adjust the paper guide.
10
Steps 11 - 14