Connecting An External Keyboard; Connecting An External Ps/2 Mouse; Connecting A Serial Mouse; Using The Parallel Port - Fujitsu Siemens Computers CELSIUS Mobile A Operating Manual

Connecting external devices
Setting the refresh rate for your external monitor
The refresh rate must be correctly set so that the image does not flicker.
Ê
To change the refresh rate or resolution select the monitor type in the menu Start - Settings -
Control Panel - Display - Settings - Advanced - Monitor.
Ê
Now select the Adapter tab.
Ê
Adjust the refresh rate and then click Apply.
If the refresh rate set is too high, the monitor may be damaged. Please see the
!
documentation included with your monitor for the maximum possible refresh rate.

Connecting an external keyboard

You do not need to switch your notebook off.
Ê
Simply connect the external keyboard to the PS/2 port on your notebook.

Connecting an external PS/2 mouse

You do not need to switch the notebook off.
Ê
Simply connect the mouse to the PS/2 port on your notebook.

Connecting a serial mouse

Ê
Switch the notebook off.
Ê
Connect the mouse to the parallel port on your notebook.
Ê
Switch the notebook on.
Ê
Run the mouse service programme under Start - Settings - Control Panel and select the General
tab.
Ê
Select the correct mouse type.
Ê
Restart the notebook.

Using the parallel port

Ê
Switch the notebook off.
Ê
Connect the data cable of the printer to the parallel port on the notebook.
Ê
Plug the printer power cable into the mains outlet.
Ê
First switch the printer on, then the notebook.
56
Connecting an external keyboard
A26391-K113-Z120-5-7619