Fujitsu Siemens Computers CELSIUS Mobile A Operating Manual page 37

Using the power-management features
Ê
Adjust the setting to your needs.
Ê
Click on OK to save the settings.
i
With Windows 2000 and Windows Me the default setting for Hibernate mode is Disabled.
Additional information on this service programme is contained in the help function of Windows 98
and Windows 2000.
Operating systems with APM
(Windows NT with APM extensions)
For operating systems with APM (Advanced Power Management) you can set the energy-
i
saving functions in the BIOS Setup (e.g. Suspend to RAM, Save to Disk, LCD off etc.).
Setting energy-saving modes
Ê
Call the BIOS Setup.
Ê
Set which energy-saving mode you want to use in the Power menu.
Ê
Set the Auto Suspend Timeout parameter in the Power menu to a time period after which the
notebook is to be switched into the energy-saving mode.
Suspend to DRAM
In this mode the current data in the main memory (DRAM) is stored. The data is stored for as long
as the notebook is supplied with energy. If the battery is full, the data is stored for a matter of days.
Without a battery and without a power supply the current data is lost.
Save to Disk
So that the current data can be saved, sufficient memory must be available on the hard disk. If the
operating system Windows NT or OS/2 Warp is used, a Save-to-Disk partition must be created on
the hard disk (see manual for respective operating system).
Additional power-management features
Closed cover switch
When you close the LCD display panel, the notebook switches into Standby mode. Opening the
LCD display panel ends Standby mode.
Ê
Set the value On in the BIOS Setup in the Power - Advanced Features menu for the Lid Closure
Suspend parameter if your notebook is to go into the energy-saving mode when the lid is folded
down.
Ê
If the energy-saving mode is to be ended again by folding up the LCD screen, then also set the
LidOpen Resume parameter to On.
A26391-K113-Z120-5-7619
Working with the notebook
27