Table of Contents
Advertisement
Preparing the notebook for use
Switching on the notebook for the first time
When you switch on your notebook for the first time, the supplied software is installed and
configured. You should plan some time for this, as this process must not be interrupted.
Do not place it on a soft surface (e.g., a carpet or soft furnishings). The space between
!
the notebook's feet must be clear. Place the notebook on a flat, stable, nonslippery
surface.
Do not place the power adapter on heat-sensitive material.
The Notebook and the power adapter should be at least 200 mm apart.
Keep other objects 100 mm away from the notebook and its power adapter to ensure
adequate ventilation.
Never cover the fan intake or exhaust openings of the notebook or the power adapter.
The power cable supplied conforms to the requirements of the country in which you
purchased your notebook. Make sure that the power cable is approved for use in the
country in which you intend to use it.
The power adapter's AC cord should only be connected to a mains outlet if the notebook
is already connected to the power adapter.
Do not expose the notebook to extreme environmental conditions. Protect it from dust,
humidity and heat.
Upon delivery, the battery can be found in the battery compartment and is not charged.
Ê
Place the notebook on a flat, stable, nonslippery surface.
Ê
Press the release button (1) and open the LED display panel (2).
10
Unpacking and checking the delivery
2
1
A26391-K113-Z120-5-7619
Advertisement
Table of Contents
Troubleshooting
