Hard Disk; Inserting And Removing Modules - Fujitsu Siemens Computers CELSIUS Mobile A Operating Manual

Working with the notebook
Power Button
You can configure the Suspend/Resume button.
If you want to use the Suspend/Resume button as an ON/OFF switch, set the Power Button
parameter to Power Off in the Power - Advanced Features menu in the BIOS Setup.
Standby timeout
With this mode the LCD screen and internal components automatically switch off after a defined
period of time. Any activity automatically returns the notebook to normal operation.
Hard Disk timeout
With this mode the motor of the hard disk drive is switched off as soon as no activity with the
keyboard or the pointing device, or any other input or output activity takes place for a time period
defined in the BIOS Setup.
This parameter is set in the Power menu in the BIOS Setup. When the hard disk is accessed, the
motor of the hard disk drive is automatically switched on again.

Hard disk

The hard disk is the most important storage medium of your notebook. You can work considerably
faster and more efficiently if you copy applications and files from floppy disks or CDs to your hard
disk.
When the hard disk is accessed, the hard disk indicator lights up.

Inserting and removing modules

Modules can be optical drives, additional hard disk or floppy disk drives or batteries.
Only use modules released for this notebook.
!
Do not use force when installing or removing a module.
Make sure that no foreign objects enter the slots.
Ê
Switch the notebook off.
Ê
Place the notebook on a flat surface.
Ê
Open the LCD display panel.
28
Hard disk
A26391-K113-Z120-5-7619