Mounting The Tray; Removing The Tray - Fujitsu Siemens Computers CELSIUS Mobile A Operating Manual

Connecting external devices

Mounting the Tray

A Tray assumes the mechanical adaptation of the notebook to the docking device. You must mount
the Tray on the docking device before you can dock the notebook.
For this notebook you require the device platform W.
Ê
Hold the Tray at an angle over the docking device and push the Tray straight into the notches
in the docking device (1).
Ê
Press down the front corners of the Tray (2) until they engage.

Removing the Tray

Ê
Push the release (1) in the direction of the arrow until the Tray is released on both sides.
Ê
Remove the Tray (2).
58
1
2
2
1
2
Operating notebook with docking device
1
A26391-K113-Z120-5-7619