Connections On The Rear; Connecting An External Monitor - Fujitsu Siemens Computers Siemens AMILO L Series Easy Manual

Connections on the rear

1 = DC jack (DC IN)
Some of the external devices require special drivers (see the operating system and
i
external device documentation).

Connecting an external monitor

An external monitor can be connected to the notebook.
► Switch off the notebook and the external monitor.
► Connect the data cable of the external monitor to the VGA connector of the notebook.
If you want to connect an analogue monitor, first connect the monitor adapter provided to
i
the VGA connector of your notebook.
► First switch on the external monitor and then the notebook.
Using the Fn + F5 key combination you can switch back and forth between the external monitor
and the LCD screen.
You can display the same picture on the external monitor and the LCD screen simultaneously.
Setting the refresh rate for your external monitor
The refresh rate must be correctly set so that the image does not flicker.
► Select the monitor type in the menu Start - Control Panel - Appearance and Themes - Display -
Settings - Advanced - Monitor.
► Now select the Adapter tab.
► Adjust the refresh rate and click Apply.
If the refresh rate set is too high, the monitor may be damaged. Please see the
!
documentation included with your monitor for the maximum possible refresh rate.
10600648445, edition 1
Connecting external devices
2 = USB ports
1
2
49