Settings In Bios Setup; Start Bios Setup; Operating Bios Setup - Fujitsu Siemens Computers CELSIUS Mobile A Operating Manual

Settings in BIOS Setup

In BIOS Setup you can set the system functions and the hardware configuration of the notebook. The
settings can only be changed via the keyboard.
When it is delivered, the notebook is set to factory default settings. You can change these settings
in BIOS Setup. Any changes you make take effect as soon as you save and quit the BIOS Setup.
The BIOS Setup programme contains the following menus:
Main: for system settings as time, date, hard disk and monitor selection
for system settings such as ports and keyboard
Advanced:
Security: for password settings and safety functions
for setting the energy saving functions
Power:
for configuring the boot sequence
Boot:
Info: for displaying the system configuration (e.g. processor and memory configuration)
to exit the BIOS Setup
Exit:

Start BIOS Setup

Ê
Restart the notebook (switching ON/OFF or warm boot).
The following display briefly appears on the screen during start-up:
<ESC> Diagnostic screen
learning
Ê When this message appears, press the key [F2].
If BIOS Setup is protected by a password or fingerprint:
i
Ê
Enter the password and press the Enter key.
Or
Ê
Place one of your registered fingertips on the fingerprint sensor.
If you have forgotten the password, contact your system administrator or contact our
hotline/help desk.

Operating BIOS setup

Press the [F1] key to display help on the operation of BIOS Setup.
i
The description of the individual settings is shown in the right-hand window of the BIOS
Setup.
You can revert to the default settings for the BIOS Setup menu you are currently in, by
using the [F9] function key.
Ê
Use the cursor key å or ç to select the menu you wish to access to make changes.
Ê
Press the Enter key.
A26391-K113-Z120-5-7619
<F12> Boot Menu <F2> BIOS Setup <F6> Battery
63