Undocking The Notebook - Fujitsu Siemens Computers CELSIUS Mobile A Operating Manual

Connecting external devices
Docking notebook while running
If an operating system is installed on your notebook that supports "Plug & Play" and "hot docking"
(e.g. Windows 98), you need not switch off the notebook for docking.
The notebook may also be in an energy-saving mode.
The power adapter cable may not be connected to the DC socket (DC IN) of the notebook
!
when you dock the notebook. The notebook must be in the battery mode.
Ê
Put your docking device into operation (see documentation for the docking devices).
Ê
Mount the suitable Tray on the docking device.
Ê
Disconnect all cables connected to notebook.
Ê
Make sure that the PC card eject buttons of the notebook are pressed in.
Ê
Place your notebook on the docking device and push it evenly in the direction of the arrows
until you feel it engage.

Undocking the notebook

Undocking notebook when switched off
Ê
Move the lever in the direction of the arrow (1).
Ê
Remove the notebook toward the front (2).
60
2
2
Operating notebook with docking device
1
A26391-K113-Z120-5-7619