Display; Hard Disk's Energy Saving Function; Loudspeakers; Volume Adjustment - Fujitsu Siemens Computers LITELINE Series Operating Manual

Switching between internal and external screen

Display

Switching off the display does not affect running programs.
Enabling: any key
Disabling: [Fn] [Fn] + [F1] [F1]
[Fn] [Fn] [F1] [F1]

Hard disk's energy saving function

If the hard disk is not accessed for a predefined period of time, its motor switches off automatically.
It will automatically switch on again when the hard disk is next accessed. The power management
features can be set in the System Configuration Utility for this purpose.

Loudspeakers

Disabling: [Fn] [Fn] + [F6] [F6]
[Fn] [Fn] [F6] [F6]
Enabling: [Fn] [Fn] + [F6] [Fn] [Fn] [F6] [F6] [F6]

Volume adjustment

Increasing the volume: [Fn]
Decreasing the volume: [Fn]
You can also adjust the volume of the loudspeaker by using the audio program (e.g. mixer) or using
the audio functions in an application program.
Switching between internal and external screen
You can opt to use:
•
just the notebook's internal display
•
just the external display
•
both the internal and the external display.
If an external monitor is connected, you can switch over the screen output with the [Fn]
combination.
Ê
Press the key combination [Fn]
A26391-K96-Z100-2-7619
[Fn] + [F7] [Fn] [Fn] [F7] [F7] [F7]
[Fn] + [F8] [F8]
[Fn] [Fn] [F8] [F8]
[Fn] + [F12] [F12] until you find the display option you require.
[Fn] [Fn] [F12] [F12]
Preparation for use and operation
[Fn] + [F12] [F12] key
[Fn] [Fn] [F12] [F12]
33