Cabletron Systems 3E02-04 User Manual page 39

7. Tighten the screws on each side of the module's front panel.
8. If you took the original module offline by pressing the OFFLINE
button, the new Ethernet Switch Module will automatically come back
on line when it is inserted in the slot.
If you used the LCM
offline, you must use the
online.
9. Check the module LED power-on sequence as described in Chapter 2,
Connecting to the Network.
10. Make the connections to the network as described in Chapter 2.
Ethernet Switch Module User Guide
Swapping An Ethernet Switch Module
command to take the original module
offline
command to bring the new module
online
Page 6-3