NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual page 62

Reference Manual for the WG302 802.11g ProSafe Wireless Access Point
• Reset to Factory Defaults. This button can also be used to clear ALL data and restore ALL
settings to the factory default values.
To clear all data and restore the factory default values:
Power off the WG302 and power it back on.
1.
Use something with a small point, such as a pen, to press the Reset button in and hold it in for
2.
at least 5 seconds.
Release the Reset button.
3.
The factory default configuration has now been restored, and the WG302 is ready for use.
6-4
December 2003
Troubleshooting