NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual page 44

Reference Manual for the WG302 802.11g ProSafe Wireless Access Point
shown below.
Figure 4-2: Wireless Access Point Status screen
This screen shows the following parameters:
Table 4-1. General Information Fields
Field
Access Point Information
Access Point Name
MAC Address
Country/Region
Firmware Version
Current IP Settings
4-6
Description
The default name may be changed if desired.
Displays the Media Access Control address (MAC address) of the wireless
access point's Ethernet port.
Displays the domain or region for which the wireless access point is
licensed for use. It may not be legal to operate this wireless access point in
a region other than one of those identified in this field.
The version of the firmware currently installed.
December 2003
Management