NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual page 27

Figure 3-2: Login result: WG302 home page
The Web browser will then display the WG302 home page.
– Click the IP Settings link and configure the IP Settings for your network.
Configure the wireless interface for wireless access. See the online help or the
b.
Understanding Basic Wireless Settings
instructions.
Note: You must set the Regulatory Domain. It may not be legal to operate the wireless
access point in a region other than one of those identified in this field.
Now that you have finished the setup steps, you are ready to deploy the WG302 in your
network. If needed, you can now reconfigure the PC you used in step 1 back to its original
TCP/IP settings.
Basic Installation and Configuration
Reference Manual for the WG302 802.11g ProSafe Wireless Access Point
December 2003
topic of this Reference Manual for full
3-6