Creating An Ndps Printer Agent - 3Com 3CRWPS10075-US - OfficeConnect Wireless 54Mbps 11g Print Server User Manual

Creating an NDPS
Printer Agent
To create Public Access Printers using the NDPS Manager Object in
NetWare Administrator, follow this procedure:
1 Start the NDPS Manager object you will be using to control the Printer
Agent.
2 At the Identification page, click the Printer Agent List.
3 Click New to see the Create Printer Agent window, as shown below.
Figure 34 Create Printer Agent
4 Enter the desired name for the Printer Agent (PA) Name.
5 Normally, the NDPS Manager will be the NDPS Manger object you are
using.
6 Select Novell Printer Gateway in the Gateway Type, see
7 Click OK and then select the available printer.
8 Select Remote (LPR on IP) in the Connection Type.
9 Click Next to see the following Configure Port Handler screen.

Creating an NDPS Printer Agent

Figure 34
87
above.