Wireless Configuration - 3Com 3CRWPS10075-US - OfficeConnect Wireless 54Mbps 11g Print Server User Manual

46 C 5: W -B
HAPTER EB
Wireless
Configuration
M
ASED ANAGEMENT
Wireless - Basic
The settings on this screen must match the other Wireless stations in
order for communication to occur.
Figure 24 Wireless Screen
Configuration
Region or
Domain
Station name
Network Type
SSID
Select your region from the drop-down list.
This field displays the region of operation for which the wireless
interface is intended. It may not be legal to operate the router in a
region other than the region shown here. If your country or
region is not listed, please check with your local government
agency for more information on which channels you are allowed
to use, and select a region, which allows those channels. (The
channel list changes according to the selected region.)
This is the same as the Device (Host) Name on the WAN screen.
On your PC, some Wireless status screens may display this name
as the Access Point in use.
Select the correct value for your Wireless LAN.
Ad-hoc mode is used when there is no Wireless Access Point,
■
and each Wireless station communicates directly with other
Wireless stations.
Infrastructure mode is used when each Wireless station
■
connects to the Wireless Access point. This also provides
access to the wired LAN.
To communicate, all Wireless stations MUST use the same SSID.
The default value is blank (null).
Note: The SSID is case sensitive.