Problem No. 1; Solution No. 1; Appletalk (Macintosh) Problems - 3Com 3CRWPS10075-US - OfficeConnect Wireless 54Mbps 11g Print Server User Manual

AppleTalk
(Macintosh)
Problems

Problem No. 1

Solution No. 1

Problem No. 2
Solution No. 2
Problem No. 3
Solution No. 3
Problem No. 4
Solution No. 4
Problem No. 5
Why do I get an incorrect printout?
Some possible reasons are:
You may have chosen Binary encoding to print the file. Try to use
■
ASCII encoding.
Some of the fonts, which are in your print file may not be supported
■
by the printer. Try selecting LaserWriter 7 instead of LaserWriter 8.
Can not find the Print Server's name in the Chooser.
Try the following:
1 Make sure that AppleTalk is on (the button next to Active is highlighted in
the Chooser).
2 Make sure the printer has been on and in the READY state for a few
minutes.
3 Make sure the printer has not been renamed since its last appearance in
the Chooser.
4 If the printer resides on a network with multiple zones, make sure the
correct zone is selected from the AppleTalk Zones box in the Chooser.
My EPS file does not print with the correct fonts.
This is a problem that occurs in some application programs. Try
downloading the fonts contained in the EPS file before printing the saved
EPS file.
I can not select the Remaining from: item in the print dialog box.
If you have selected the Layout value, 2 Up, or 4 Up, you cannot access
the Remaining from item. Choose other selections.
A cover page prints either on the first or the last page of the document.

AppleTalk (Macintosh) Problems

59