Interval Repeat Play; Auto Repeat Play; Showview Extend (Sv-675F/Sv-275F Only) - Samsung SV-271F Instruction Manual

Interval Repeat Play

You can set interval repeat play to repeat the
cassette several times for special interval.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the EASY OPERATION option.
3
Press the OK button to select this option.
Result: The EASY OPERATIONN menu is displayed.
4
Press the corresponding
the NO. OF INTERVAL REPEAT option is
selected.
5
To...
Interval repeat play
Cancel interval
repeat play
6
On completion, press MENU twice to exit the
menu.
7
To select interval during playback, press the
INPUT/REPEAT button at the desired start point.
Result: "INTERVAL REPEAT SETTING" is
displayed.Press the INPUT/REPEAT
button one more time at the desired end
point.
Result: The tape is automatically rewound to the
start point. "INTERVAL REPEAT" is
displayed.
or ➛, ❿ buttons to
,
❷
or buttons, until
❷
Press ❿, until...
5, 10, 15 is displayed.
(choose repeat time 5
times, 10 times, 15 times)
OFF is displayed.

Auto Repeat Play

You can set repeat play to repeat the tape
continuously from beginning to end.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the EASY OPERATION option.
3
Press the OK button to select this option.
Result: The EASY OPERATION menu is
displayed.
4
Press the corresponding
the REPEAT PLAY option is selected.
5
To...
Repeat play
Do not wish to repeat play OFF is displayed.
6
On completion, press MENU twice to exit the
menu.
ShowView EXTEND (SV-675F/
SV-275F Only)
To prevent delays or over-runs the VCR has a
function called ShowView EXTEND allowing
you to extend the recording time by up to 60
minutes.
Only use if PDC is not available or set to
OFF.
1
Press the MENU button on the remote control.
2
Press the corresponding
select the EASY OPERATION option.
3
Press the OK button to select this option.
Result: The EASY OPERATION menu is
displayed.
4
Press the corresponding
the SHOWVIEW EXTEND option is selected.
5 Press ➛ or ❿ buttons to set the ShowView
EXTEND time by increments of 10 minutes.
6 To turn off, press ➛ or ❿ buttons repeatedly until
OFF shows.
ENG-24
or ➛, ❿ buttons to
,
❷
or buttons, until
❷
Press ➛ or ❿, until...
ON is displayed.
or ➛, ❿ buttons to
,
❷
or buttons, until
❷