Using The Timer Programming Feature - Samsung SV-271F Instruction Manual

Using the Timer Programming Feature

The Timer Programming feature allows you to
preset the VCR to record a programme up to
one month before that programme is to be
broadcast. Up to six programmes can be
preset.
Before presetting a recording, check
that the date and time are correct.
1
Insert the cassette. Press the TIMER button.
Press the or buttons to select the
❷
STANDARD option and then press the ❿ button or,
Press MENU on the remote control.
Result: The programming menu is displayed.
Press the OK button to select TIMER
PROGRAMMING option.
Result: The TIMER PROGRAMMING menu is
displayed.
2 Press ❿ to select the input source.
3
Select the required station by pressing the
buttons or INPUT to select the AV1, AV2 or
AUX (SV-675F/SV-671F only) input sources.
4 Press ❿ to select the recording day.
5
Select the required day by pressing the
buttons.
❷
6 Press ❿ to select the recording start time.
7
Select the required hour value by pressing the
or buttons.
❷
8
Press ❿ to select the minutes.
9
Select the required minute value by pressing the
or buttons.
❷
10 Press ❿ to select the recording end time.
11
Select the required recording end time by
pressing the or
❷
procedure as when selecting the recording start
time.
With SV-675F/SV-671F/SV-471F, you can
select the recording speed.
a. Press ❿ to select the the recording speed
(AUTO/SP/LP).
b. Press the or
❷
between the AUTO, SP (Standard Play) or
LP (Long Play).
,
or
buttons, following the same
buttons to switch
12 . Press ❿ to select the VPS or PDC(V/P)
recording mode.
13
Press the
the VPS or PDC mode (marked ON) and the non-
VPS/PDC mode (marked -).
14
When you have finished, press the MENU button.
15
Press the VCR STANDBY/ON (STANDBY/ON)
button to activate the timer.
Result: Before starting recording, the VCR
compares the timer duration with the
remaining time on the cassette.
Auto Tape Speed Select (SV-675F/ SV-671F
/SV-471F Only) The VCR's "Auto Tape Speed
Select" function compares the duration of the
timer recording to the actual recording time
remaining on the tape loaded. If there is
insufficient tape to complete a timer recording
❷
in AUTO mode, the VCR automatically
switches to LP mode to record the whole
programme.
E.g. If there is a one hour Timer Recording in
AUTO mode to be started, and only 40
minutes tape remaining, the VCR will
record in SP for 20 minutes and switch to
complete the remaining 40 minutes in LP
mode.
ENG-18
or buttons to toggle between
❷