Table of Contents
Advertisement
Format 16:9 (WIDE SCREEN)
Your VCR can automatically read a 16:9 signal
from the AV2 input or a prerecorded 16:9 tape.
It can broadcast a 16:9 signal through a 21 pin
scart cable.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
to select the USER SET option.
3
Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding
FORMAT 16:9 option is selected.
5
Press the ❿ button to select AUTO
AUTO Set when you use a wide TV. The VCR
detects wide TV programmes and normal
TV programmes automatically when
playing back and recording.
ON
The VCR always plays back and records
in the mode compatible with 16:9 wide
screen. Set if the VCR cannot detect wide
TV programmes with "AUTO" set.
OFF
Set if you do not use a wide TV.
6
On completion, press MENU twice to exit the
menu.
or ➛, ❿ buttons
,
❷
or
buttons, until the
❷
ON
OFF.
ENG-21
Selecting the Audio Output Mode
(SV-675F/SV-671F Only)
When monitoring a TV programme or playing
back a Hi-Fi recorded video tape, press the
AUDIO button to select a desired sound output.
As the AUDIO button is pressed, the sound output
and the indicator change as below:
Sound
Stereo
type
sound
OSD
display
Heard in
stereo. (left
L R
channel and
right channel)
Left channel
heard from both
L
the lef and right
speakers.
Right channel
heard from
both the left
R
and right
speakers.
Sound mixed the left and right channels,
MIX
and the normal audio track.
Heard in
monaural.
MONO
Bilingual
Standard
sound
sound
broadcast
Channel I (MAIN)
Heard in
monaural.
heard from the
left speaker,
channel II (SUB)
heard from the
right speaker.
Channel I (MAIN)
Heard in
monaural.
heard from both
the left and the
right speakers.
Heard in
Channel II-(SUB)
monaural.
heard from both
the left and the
right speakers.
Channel I (MAIN)
Heard in
monaural.
heard from both
the left and the
right speakers.
Advertisement
Table of Contents
