Using The Assemble Edit Function; Recording From Another Vcr Or Camcorder - Samsung SV-271F Instruction Manual

Using the Assemble Edit
Function
This function allows you to start a new recording
at a specific position on the cassette while
maintaining a very smooth scene change.
1
Insert the cassette to be edited in your VCR.
2 Press the ❿ll button to start playback.
3
When you reach the position from which you wish
to start the new recording, press the ❿ll button.
F.ADV
4
Press the F.ADV (
necessary to advance frame by frame, until the
exact recording position is located.
5
While the VCR is in still mode, hold the REC
button down for a while to activate the Assemble
Edit function.
Result: Record symbol flashes in the display.
6
Select the source from which you wish to record
by pressing:
The PROG/TRK (
buttons for television channels
The INPUT button for the AV1, AV2 or AUX
(SV-675F/SV-671F only) input sources
7
Press the❿ll button to start recording.
8
When you have finished recording, press
) button again as often as
or ❷) / PROG ( or ❷)
.
Recording from Another VCR
or Camcorder
ou can copy a cassette to your VCR from
another video source, such as another VCR or a
camcorder.
It is an infringement of copyright laws to
copy prerecorded cassettes or to re-record
them in any form without the permission of
the owners of the corresponding copyright.
1
Connect the VCR, from which the cassette is to
be copied, to the appropriate SCART audio and
video input connectors on the rear of your VCR.
You can also use an RCA audio and video cable
to connect the AUX input on the front of your
VCR. (SV-675F/SV-671F only)
2
Insert a blank cassette in your VCR.
3
Insert the pre-recorded cassette in the other
video source (VCR or camcorder).
4
Press the INPUT button to select the appropriate
input on your VCR:
AV1 or AV2 for the SCART input
AUX for the RCA input
671GX only)
5
Start playing back the cassette to be copied.
6
Hold REC down for a while to start recording on
your VCR.
7
When you have finished recording, press
both VCRs.
If you wish to view the cassette being
copied:
Your VCR must be connected as usual to
the television (see page 10 for further
details)
ENG-26
(SV-675GX/ SV-
on