Using The Tv Buttons On The Remote Control; (Sv-675F Only); Auto Power Off - Samsung SV-271F Instruction Manual

Video cassette recorder
Table of Contents

Advertisement

Using the TV Buttons on the Remote Control (SV-675F Only)
Your VCR remote control will work with
Samsung televisions and compatible brands.
To determine whether your television is compatible,
follow the instructions below.
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure
code corresponding to the brand of your
television, by pressing the appropriate numeric
buttons.
Brand
Codes
SAMSUNG
01 to 06
AKAI
09, 23
GRUNDIG
09, 17, 21
LOEWE
02
PANASONIC 08, 23 to 27
Result: If your television is compatible with the
remote control, it is switched off. It is now
programmed to operate with the remote
control.
If several codes are indicated for your
television brand, try each one in turn until you
find one that works.
When you change the batteries in the remote
control, you must reprogramme the code,
following the same procedure.

Auto Power off

The Auto Power Off feature automatically turns off your VCR if no signal is received and you do not
press any button for the selected time.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the EASY OPERATION option.
3
Press the OK button to select this option.
Result: The EASY OPERATION menu is displayed.
4
Press the corresponding
5
Press the ❿ button, until you select the time of Auto Power off interval.
OFF
2HOUR
6
On completion, press MENU twice to exit the menu.
Brand
Codes
PHILIPS
02, 20, 22
SABA
13, 14, 22 to 24
SONY
15, 16
THOMSON 13, 14, 24
TOSHIBA
07, 16 to 19, 21
or ➛, ❿ buttons to
,
or
buttons, until the AUTO POWER OFF option is selected.
3HOUR
ENG-27
You can then control the television using the following
buttons.
Button
Function
TV STANDBY/ON Used to switch the television on
and off.
TV or VCR
Used to switch between the
TV and VCR modes. Only the
VOL (+ or – ) and TV
STANDBY/ON buttons are
operational in VCR mode.
-/--
Used to enter a two-figure
programme number.
Example: For programme 12,
press -/-- followed by numeric
buttons 1 and 2.
INPUT
Used to select an external source.
VOL + or –
Used to adjust the volume of the
television.
PROG/TRK
Used to select the required
or ❷)
(
programme.
DISP./
Used to switch between an
external source and the television
tuner.
The various functions will not necessarily
work on all televisions. If you encounter
problems, operate the television directly.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sv-471fSv-671fSv-675fSv-275f

Table of Contents