Auto Repeat Play; Interval Repeat Play; Using The Tape Counter - Samsung SV-G35K/AFR Instruction Manual

Auto Repeat Play

You can set repeat play to repeat the tape continuously from
beginning to end.
1
Press MENU on the remote control.
PROG OPTIONS INSTALL
Result:
CLOCK BONUS BONUS LANG
2
Press the corresponding
EASY OPERATION
EASY OPERATION
➛❿!! OK END: MENU 3
$ ❷!! Press the OK button to select this option.
Result:
4
Press the corresponding
REPEAT PLAY
BONUS
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
5 To...
NO. OF
INTERVAL REPEAT : 5
Repeat play
Do not wish to repeat play
❿ END: MENU
$ ❷
6
On completion, press MENU twice to exit the menu.

Interval Repeat Play

You can set interval repeat play to repeat the cassette several times
for special interval.
1
Press MENU on the remote control.
Result:
PROG OPTIONS INSTALL
2 Press the corresponding
OPERATION
BONUS
CLOCK BONUS LANG
3 Press the OK button to select this option.
EASY OPERATION
Result:
➛❿!!
OK END: MENU
$ ❷!! 4
Press the corresponding
NO. OF INTERVAL REPEAT
5
To...
Interval repeat play
BONUS
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
Cancel interval repeat play
6 On completion, press MENU twice to exit the menu.
❿
END: MENU
$ ❷
7
To select interval during playback, press the INPUT/REPEAT
button at the desired start point.
Result:
Press the INPUT/REPEAT button one more time at the desired
end point.
Result:
32
The programming menu is displayed.
or ➛, ❿ buttons to select the
,
$ ❷
option.
The EASY OPERATION menu is displayed.
or buttons, until the
$ ❷
option is selected.
Press ➛ or ❿, until...
ON is displayed.
is displayed.
OFF
The programming menu is displayed.
, or ➛, ❿ buttons to select the
EASY
$ ❷
option.
The EASY OPERATIONN menu is displayed.
or buttons, until the
$ ❷
option is selected.
Press ❿, until...
5, 10, 15 is displayed.
(choose repeat time 5 times,
10 times, 15 times)
OFF is displayed.
" INTERVAL REPEAT SETTING " is displayed.
The tape is automatically rewound to the start point.
" " is displayed.
INTERVAL REPEAT

Using the Tape Counter

The tape counter:
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
Is reset when a cassette is inserted in the VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your VCR.
2
To set the tape counter to zero at the beginning of a sequence:
Press DISP./ or DISPLAY twice to display the counter
Press CLR/RST when you want to set the tape counter to
zero
3
When you are ready,
Start playback or Recording.
Press the button.
To fast-froward or rewind to the sequence at which the
➛ ➛ ❿ ❿
counter was set to zero, press or .
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 15).
Press DISP./ or DISPLAY:
Once to display the current function, programme
number, recording speed (SV-G85K only), date, time
and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
Four times to clear the display
0:00:00
(SV-G85K) (SV-G35K)
CLR/RST F.ADV INDEX CLR/RST F.ADV INDEX
-/--
SELECT
A.TRK IPC INPUT
TV VCR INPUT
2 2 GB
REPEAT REPEAT
AUDIO DISP./ UDIO DISPLAY
VOL PROG/TRK TRK PROG
2 2
REC MENU REC MENU
33