Searching For A Specific Sequence - Samsung DVD-V530A Instruction Manual

VCR

Searching for a Specific Sequence

OK
GB
1
38
Each time you record a cassette on this DVD-VCR, an "index" is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on
the direction selected, the indexes are numbered as follows:
Prev Seq. being Next
Seq. played Seq. etc.
etc.
2 1 1 2
➢
This DVD-VCR uses a standard indexing system (VISS).
As a result, it will recognize any indexes marked by
other VCRs using the same system and vice versa.
Go To 0:00:00 Stop
Use this feature when you want to search for the 0:00:00 counter
position on a cassette. Press the CLEAR button at the point on the tape
where you want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
1 After pressing the SEARCH, press the corresponding
buttons, until the Go To (0:00:00) option is selected.
2 Press the OK or ❿.
End Search
Use this feature when you want to search for a blank position to record
a program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the
tape during end search, the tape will be ejected.
1 After pressing the SEARCH, press the corresponding
buttons, until the End Search option is selected.
2 Press the OK or ❿.
Searching for a Specific Sequence
Intro Scan
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan
2 Press the OK or ❿ .
3 Press the ➛ ➛ ❿ ❿
or buttons depending on the direction
where your desired programme is located.
4
When an Index mark is found the DVD-VCR will playback the
tape for 5 seconds, after which it will continue searching for the
next Index mark.
5 If you want to watch the tape from a particular Index, simply
❿ II
press twice.
ndex Skip Search:
I
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different
programmes on a tape and you have rewound the tape to the
beginning, by using this feature you can go directly to the start of
programme 2 simply by pressing the SEARCH button.
or
❷
1 After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan
2 Press the OK or ❿ .
3 Press the ➛ ➛ ❿ ❿
or buttons twice more. This will take
you directly to the start of the desired programme is located.
4
These Index searches can be made forwards: (press
➛ ➛
backwards: (press
5
To cancel an Index search simply press the
or
❷
or
❷
option is selected.
or
❷
option is selected.
❿ ❿
) or
➛ ➛ ❿ ❿✌
). ( -20 0 +20
G G G G
or I button.
❿ II
VCR
GB
INTRO SCAN:
➛ ➛ ❿ ❿
INDEX SEARCH : ➛ ➛ - 6
3
3
39