Searching For A Specific Sequence - Samsung CHT-500 Instruction Manual

Searching for a Specific Sequence

Each time you record a cassette on this DVD-VCR, an "index"
is automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on
the direction selected, the indexes are numbered as follows:
etc.
This DVD-VCR uses a standard indexing system
(VISS).
As a result, it will recognize any indexes marked by
other VCRs using the same system and vice versa.
Go to [0:00:00] Stop
Use this feature when you want to search for the [0:00:00] counter
position on a cassette. Press the CLEAR button at the point on the tape
where you want to set the counter to [0:00:00].
The VCR will rewind or fast forward, searching for the [0:00:00]
counter position, and then automatically stop at that position.
1
After pressing the SEARCH, press the corresponding
buttons, until the
2 Press the OK or ❿.
End Search
Use this feature when you want to search for a blank position to
record a program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the
tape during end search, the tape will be ejected.
1
After pressing the SEARCH, press the corresponding
buttons, until the
2 Press the OK or ❿.
Downloaded From TheatreSystem-Manual.com Manuals
Prev Seq. being Next
Seq. played Seq.
2 1 1
Go To [0:00:00] option is selected.
End Search option is selected.
etc.
2
or
# ❷
or
# ❷
VCR
GB
39