Table of Contents
Advertisement
VCR
Using the Tape Counter
GB
0:00:00
2
40
The tape counter:
N Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
N Is reset when a cassette is inserted in the DVD-VCR
N Allows you to find the beginning of a sequence easily
☛
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your DVD-VCR.
2
To set the tape counter to zero at the beginning of a sequence:
N
Press INFO. twice to display the counter
N
Press CLEAR when you want to set the tape counter to
zero
3
When you are ready,
N
Start playback or Recording.
N
Press the I button.
N
To fast-froward or rewind to the sequence at which the
➛ ➛
❿ ❿
counter was set to zero, press
or
.
➢
Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page 26).
Press INFO.:
N
Once to display the current function, programme
number, recording speed, date, time and counter
N
Twice to display the counter only
N
Three times to display the time remaining on the
cassette
N
Four times to clear the display
Connecting an RCA Audio/Video Input Cable
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available
on the equipment chosen.
Examples: N You wish to copy a video cassette with the help of
a second VCR.
N You wish to play back and/or copy pictures taken
with a camcorder .
☛
N Make sure that both the television and the DVD-
VCR are switched off before connecting the cables.
1
Connect one end of the RCA video cable into the VIDEO INPUT
socket on the front of the DVD-VCR.
2
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable supplied into the
AUDIO INPUT sockets on the front of the DVD-VCR.
➢
Take care to respect the colour coding of the left and right
channels.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi
sound system).
VCR
GB
1
3
3
41
Advertisement
Table of Contents
