Searching For A Specific Sequence - Samsung DVD-V6500K User Manual

Searching for a
Specific Sequence
Each time you record a cassette on this DVD-VCR,
an "index" is automatically marked on the tape when
recording starts.
The Search function allows you to fast-forward or rewind
to a specific index and start playback from that point.
Depending on the direction selected, the indexes are
numbered as follows:
Prev Seq. being
etc. Seq. played
2 1
• This DVD-VCR uses a standard indexing system
(VISS). As a result, it will recognize any indexes
marked by other VCRs using the same system
and vice versa.
❚
Go To [0:00:00] Stop
Use this feature when you want to search for the 0:00:00
counter position on a cassette.
Press the CLEAR button at the point on the tape where
you want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at
that position.
Press the MENU button, then press the ... or †
1
button to select FUNC.
Press the OK or √ button.
The Function menu is displayed.
DVD Function
SETUP
VCR Function
DVD
VCR
FUNC
OK
Next
Seq. etc.
1 2
Function
√ √
√ √
RETURN MENU
Press the ... or † button to select VCR Function,
2
then press the OK or √ button.
The VCR Function menu is displayed with the Go
To [0:00:00] selected.
Go To [0:00:00]
SETUP
End Search
DVD
Intro Scan
VCR
FUNC
OK
• It can be displayed simply by pressing the
SEARCH button.
Press the OK or √ button again.
3
❚
End Search
Use this feature when you want to search for a blank
position to record a program on a cassette.
The VCR will fast forward, searching for a blank position,
and then automatically stop at that position.
If the VCR reaches the end of the tape during end
search, the tape will be ejected.
1 Press the SEARCH button
The VCR Function menu is displayed.
Press the ... or † button to select End Search.
Go To [0:00:00]
SETUP
End Search
DVD
Intro Scan
VCR
FUNC
OK
Press the OK or √ button.
2
VCR Function
RETURN MENU
VCR Function
RETURN MENU
English - 23